Abrasive wear resistance
views:166
Flux Cored Wire LZ650
Classification
DIN 8555 | DIN EN 14700
MF 10-65-G | T Fe 15-65-G
Characteristic
LZ650 is C-Cr alloy open arc flux cored wire, hardfacing components that are withstanding severe abrasive wear, it can be used for one layer hardfacing, without a big decrease of hardness, weld metal thickness should be limited in 4mm..
Application
Wear plate, chute, scraper, etc under mild impact resistance.
Typical All Weld Metal Analysis
|
C |
Mn |
Si |
Cr |
Fe |
|
4.5 |
0.6 |
1.0 |
26.0 |
Bal. |
Typical All Weld Metal Mechanical Properties
Hardness: 63HRC
Parameter
|
Diameter |
Voltage |
Amps |
Packing |
|
2.4mm |
28-33V |
280-380A |
25kg, 50kg/coil, 250kg/drum |
|
2.8mm |
30-34V |
320-420A |
25kg, 50kg/coil, 250kg/drum |
Welding: Flat